Navien Combi Boiler Installation in Burnaby in Greater Vancouver

Installing a Navien combi boiler in a Burnaby home is one of the cleaner ways to consolidate space heating and domestic hot water into a single wall-hung unit. HeatLand handles Navien combi installation across Burnaby, from the older post-war bungalows around Burnaby Heights to the newer townhomes and laneway suites near Brentwood and Metrotown. This page explains how the installation works, what makes it a good fit for Burnaby's housing stock, and how we keep the work licensed and code-compliant.

Why a Navien combi boiler suits many Burnaby homes

Burnaby's mix of mid-century houses and tighter infill lots means mechanical-room space is often at a premium. A Navien combi boiler condenses both your hydronic heating and your hot water into one compact wall-mounted gas appliance, which frees up the floor area a separate boiler and tank would otherwise take. For a renovated basement suite or a laneway home where every square foot counts, that footprint matters.

Navien's condensing combi design captures heat from the flue gases that an older atmospheric unit would send straight up the chimney, so it delivers strong seasonal efficiency in our long, damp coastal heating season. On a single-family home in Capitol Hill or a strata townhome near Lougheed, that efficiency shows up as steadier comfort and lower gas use through the wet Burnaby winter.

• One wall-hung unit handles both radiant/baseboard heat and hot water on demand
• Compact footprint frees up mechanical-room or closet space in suites and laneway homes
• Condensing efficiency suits Burnaby's long, cool, damp heating season
• On-demand hot water means no standby tank losses

How HeatLand approaches a Navien combi installation in Burnaby

A proper combi install starts with sizing. We assess your home's heat-loss and your peak hot-water demand so the Navien unit you receive matches how many fixtures run at once and how your heating loop is laid out. Oversizing or undersizing a combi is the most common cause of disappointing showers, so we size to your actual Burnaby home rather than a rule of thumb.

From there our licensed technicians handle the gas connection, the condensing flue and venting routing, the condensate drain, and the water and heating ties-ins to code. Gas and venting are never DIY work; they belong with a licensed gas fitter. We also commission the unit and walk you through the controls before we leave.

• Heat-loss and hot-water demand sizing for your specific home
• Licensed gas, venting, and condensate work to current code
• Clean tie-in to existing baseboard, radiant, or fan-coil loops
• Commissioning and a controls walkthrough on completion

Frequently Asked Questions

Can a Navien combi boiler replace both my furnace and hot water tank in a Burnaby house?

A combi replaces a boiler and a hot water tank, since it provides hydronic (water-based) heating plus on-demand hot water. If your Burnaby home currently heats with a forced-air furnace and ducts rather than radiators or in-floor loops, switching to a combi is a larger conversion. We assess your existing system first and tell you honestly what the change involves.

Will a Navien combi keep up with hot water for a multi-bath Burnaby home?

It can, as long as it's sized correctly. The key is matching the unit's flow capacity to how many showers and taps you expect to run at the same time. We base the recommendation on your fixture count and household, which is why proper sizing during the quote is so important.

Are rebates available for a high-efficiency combi install in Burnaby?

High-efficiency condensing combi units may qualify for FortisBC or CleanBC rebates, and financing may be available depending on the program in effect. Amounts and eligibility change over time, so we confirm what currently applies to your Burnaby home before installation.

How long does a Navien combi installation take?

A straightforward swap onto existing hydronic piping is often completed in a day, while a more involved retrofit with new venting routing or relocated piping can take longer. We give you a realistic timeline for your Burnaby home once we've seen the mechanical space.

HeatLand Heating & Cooling is a licensed and insured, TSBC-certified HVAC company serving homeowners across Greater Vancouver. Our technicians diagnose the real fault, explain your options in plain language, and complete the work safely and to code.

{“@context”:”https://schema.org”,”@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:”Can a Navien combi boiler replace both my furnace and hot water tank in a Burnaby house?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”A combi replaces a boiler and a hot water tank, since it provides hydronic (water-based) heating plus on-demand hot water. If your Burnaby home currently heats with a forced-air furnace and ducts rather than radiators or in-floor loops, switching to a combi is a larger conversion. We assess your existing system first and tell you honestly what the change involves.”}},{“@type”:”Question”,”name”:”Will a Navien combi keep up with hot water for a multi-bath Burnaby home?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”It can, as long as it’s sized correctly. The key is matching the unit’s flow capacity to how many showers and taps you expect to run at the same time. We base the recommendation on your fixture count and household, which is why proper sizing during the quote is so important.”}},{“@type”:”Question”,”name”:”Are rebates available for a high-efficiency combi install in Burnaby?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”High-efficiency condensing combi units may qualify for FortisBC or CleanBC rebates, and financing may be available depending on the program in effect. Amounts and eligibility change over time, so we confirm what currently applies to your Burnaby home before installation.”}},{“@type”:”Question”,”name”:”How long does a Navien combi installation take?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”A straightforward swap onto existing hydronic piping is often completed in a day, while a more involved retrofit with new venting routing or relocated piping can take longer. We give you a realistic timeline for your Burnaby home once we’ve seen the mechanical space.”}}]}{“@context”:”https://schema.org”,”@type”:”Article”,”headline”:”Navien Combi Boiler Installation in Burnaby in Greater Vancouver”,”publisher”:{“@type”:”Organization”,”name”:”HeatLand Heating & Cooling”,”url”:”https://heatland.ca”},”url”:”https://heatland.ca/navien-combi-installation-burnaby/”}