Heat pump maintenance in Burnaby from HeatLand — annual service for central ducted heat pumps and ductless mini-split systems throughout Burnaby. Covering coil cleaning, refrigerant pressure checks, and full electrical inspection.
What’s Included in a Heat Pump Maintenance Service in Burnaby
HeatLand’s heat pump maintenance service for Burnaby homeowners covers both the outdoor unit and the indoor air handler or ductless head:
Outdoor unit:
- Coil cleaning — removing dirt, debris, and vegetation from the outdoor coil fins that reduce heat transfer efficiency
- Refrigerant pressure check — confirming operating pressures are within manufacturer specifications; low refrigerant pressure indicates a leak that must be found and repaired
- Electrical connections — confirming all high-voltage and control wiring connections are tight and corrosion-free
- Contactor inspection — the contactor switches high-voltage power to the compressor and fan; worn contacts cause voltage drops and compressor damage
- Capacitors — start and run capacitors degrade over time; testing confirms they’re within specification
- Fan motor and blade — confirming correct operation, blade clearance, and motor bearing condition
Indoor air handler / ductless head:
- Filter cleaning or replacement
- Evaporator coil inspection and cleaning
- Condensate drain check — confirming the drain is clear and flowing correctly
- Control board function — confirming correct heating and cooling cycles, defrost operation, and thermostat response
Related: Heat pump installation | Heat pump repair
FAQs — Heat Pump Maintenance in Burnaby
How often should a heat pump be serviced in Burnaby?
Annual maintenance is recommended for heat pump systems. Unlike a furnace that only runs in winter, a heat pump in Greater Vancouver runs in both heating and cooling seasons — accumulating more operating hours per year than a heating-only system. Annual service keeps the coil clean, confirms refrigerant charge, and catches electrical component degradation before it causes a failure.
What is the difference between heat pump maintenance and a furnace tune-up?
A furnace tune-up focuses on the gas combustion system — heat exchanger, burners, ignition, gas valve, and flue. Heat pump maintenance focuses on the refrigerant circuit and electrical components — coil condition, refrigerant charge, contactor, capacitors, and the defrost system. HeatLand offers both as part of a combined annual HVAC maintenance visit if your system includes both a heat pump and a gas furnace backup.