Goodman HVAC Parts & Maintenance in Vancouver
Keeping a Goodman heating and cooling system in good condition requires regular maintenance and timely replacement of wear parts. HeatLand provides Goodman HVAC maintenance services and sources replacement parts for Goodman equipment throughout Greater Vancouver.
Common Goodman Maintenance Items
- Air filters — Goodman furnaces and air handlers use standard 1-inch filters or high-capacity media filters depending on the model. Filter replacement is the most important regular maintenance task for Goodman systems.
- Flame sensors — a Goodman furnace flame sensor (also called a flame rod) should be cleaned annually. A degraded flame sensor causes the furnace to light and then shut off after a few seconds.
- Capacitors — Goodman heat pump and AC outdoor units use run and start capacitors that degrade over time. Capacitor testing is part of every HeatLand maintenance visit on Goodman cooling equipment.
- Contactors — the contactor switches high-voltage power to the Goodman compressor and condenser fan motor. Worn contacts cause voltage drops and compressor damage.
- Refrigerant — if your Goodman heat pump or AC is low on refrigerant, there is a leak that must be found and repaired by a licensed refrigeration mechanic. HeatLand performs leak detection and repair on Goodman refrigerant systems.
Annual Maintenance for Goodman Systems in Vancouver
HeatLand’s annual maintenance service for Goodman equipment covers all major components: combustion system, heat exchanger, refrigerant circuit, electrical components, and controls. Annual maintenance is the most cost-effective way to prevent unplanned Goodman equipment failures in a Greater Vancouver home.
Related: Annual HVAC maintenance | Furnace tune-up