Central Air Conditioning in Greater Vancouver — HeatLand

Central air conditioning installation, repair and maintenance across Greater Vancouver — HeatLand has been cooling Metro Vancouver homes with ducted AC systems since 1999.

Central AC services we offer

Is central AC right for your home?

Central air conditioning is the most seamless cooling option if your home already has a forced-air furnace and ductwork. The existing blower, thermostat and air distribution infrastructure are already in place — adding central AC simply adds the cooling circuit.

If your home does not have ductwork (common in older Metro Vancouver homes, ranchers and condos), a ductless mini-split or heat pump is more practical and often more efficient. We will assess your situation honestly and recommend the right solution.

Brands we install and service

HeatLand installs and repairs all major central AC brands: Carrier, Lennox, Trane, Goodman, Rheem, Bryant, York, American Standard, Amana, KeepRite, Napoleon and more. We use brand-agnostic advice — the right system for your home, not the one with the best margin for us.

Frequently asked questions about central air conditioning

What is central air conditioning and how does it work?

A central air conditioning system uses a split configuration: an outdoor condensing unit (compressor + condenser coil) and an indoor evaporator coil installed in or on your furnace, connected by refrigerant lines. The furnace blower circulates air over the cold evaporator coil, distributing cooled air through your existing ductwork to every room. The outdoor unit rejects the heat extracted from your home.

Does my home need ductwork for central air conditioning?

Yes — central air uses your existing furnace ductwork to distribute cooled air. If your home does not have a forced-air furnace with ductwork, central AC is not practical without major construction. In that case, a ductless mini-split or heat pump is the right solution. We assess your home and recommend the best system during a free site visit.

How much does central air conditioning cost in Metro Vancouver?

A central AC installation in Metro Vancouver typically ranges from $3,500 to $7,500 installed, depending on system capacity, brand, and installation complexity. Homes that need electrical panel upgrades or significant duct modifications will be at the higher end. We provide a firm written quote after assessing your home. High-efficiency heat pumps that replace both your AC and furnace have higher initial costs but substantial rebates available.

What SEER rating should I look for in a new central AC?

SEER2 is the current efficiency standard in Canada. Look for a minimum of SEER2 14 (roughly equivalent to old SEER 17) for solid efficiency. Premium units reach SEER2 20+ and can significantly reduce your electricity bills over the life of the system. We will explain the payback calculation for your situation so you can make an informed choice.

Can I add central AC to a home that only has a furnace?

Yes — this is one of the most common installations HeatLand does in Metro Vancouver. We add a matching evaporator coil to your existing furnace, run refrigerant lines to a new outdoor condensing unit, and connect to your existing ductwork. The furnace blower distributes the cooled air. We ensure the furnace ductwork is adequate for cooling loads and make modifications if needed.

{“@context”:”https://schema.org”,”@graph”:[{“@type”:”Service”,”serviceType”:”Central Air Conditioning”,”name”:”Central Air Conditioning in Greater Vancouver”,”provider”:{“@type”:”HVACBusiness”,”name”:”HeatLand Heating & Cooling”,”telephone”:”+16043303812″,”url”:”https://heatland.ca”,”address”:{“@type”:”PostalAddress”,”addressLocality”:”Vancouver”,”addressRegion”:”BC”,”addressCountry”:”CA”}},”areaServed”:{“@type”:”AdministrativeArea”,”name”:”Metro Vancouver, BC”},”description”:”A central air conditioning system uses a split configuration: an outdoor condensing unit (compressor + condenser coil) and an indoor evaporator coil installed in or on your furnace, connected by refrigerant lines. The furnace blower circulates air over the cold evaporator coil, distributing cooled air through your existing ductwork to every room. The outdoor unit rejects the heat extracted from your home.”},{“@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:”What is central air conditioning and how does it work?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”A central air conditioning system uses a split configuration: an outdoor condensing unit (compressor + condenser coil) and an indoor evaporator coil installed in or on your furnace, connected by refrigerant lines. The furnace blower circulates air over the cold evaporator coil, distributing cooled air through your existing ductwork to every room. The outdoor unit rejects the heat extracted from your home.”}},{“@type”:”Question”,”name”:”Does my home need ductwork for central air conditioning?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Yes — central air uses your existing furnace ductwork to distribute cooled air. If your home does not have a forced-air furnace with ductwork, central AC is not practical without major construction. In that case, a ductless mini-split or heat pump is the right solution. We assess your home and recommend the best system during a free site visit.”}},{“@type”:”Question”,”name”:”How much does central air conditioning cost in Metro Vancouver?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”A central AC installation in Metro Vancouver typically ranges from $3,500 to $7,500 installed, depending on system capacity, brand, and installation complexity. Homes that need electrical panel upgrades or significant duct modifications will be at the higher end. We provide a firm written quote after assessing your home. High-efficiency heat pumps that replace both your AC and furnace have higher initial costs but substantial rebates available.”}},{“@type”:”Question”,”name”:”What SEER rating should I look for in a new central AC?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”SEER2 is the current efficiency standard in Canada. Look for a minimum of SEER2 14 (roughly equivalent to old SEER 17) for solid efficiency. Premium units reach SEER2 20+ and can significantly reduce your electricity bills over the life of the system. We will explain the payback calculation for your situation so you can make an informed choice.”}},{“@type”:”Question”,”name”:”Can I add central AC to a home that only has a furnace?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Yes — this is one of the most common installations HeatLand does in Metro Vancouver. We add a matching evaporator coil to your existing furnace, run refrigerant lines to a new outdoor condensing unit, and connect to your existing ductwork. The furnace blower distributes the cooled air. We ensure the furnace ductwork is adequate for cooling loads and make modifications if needed.”}}]},{“@type”:”BreadcrumbList”,”itemListElement”:[{“@type”:”ListItem”,”position”:1,”name”:”Home”,”item”:”https://heatland.ca/”},{“@type”:”ListItem”,”position”:2,”name”:”Air Conditioning”,”item”:”https://heatland.ca/air-conditioning-services/”},{“@type”:”ListItem”,”position”:3,”name”:”Central Air Conditioning in Greater Vancouver”,”item”:”https://heatland.ca/central-air-conditioning/”}]}]}