When a furnace tries to start but the burners never light, it is an ignition failure. Here is what causes it, what you can safely check, and when to call a licensed technician.
Likely causes
In rough order of how often we see them:
- A failing hot-surface igniter or a worn spark electrode.
- A dirty flame sensor that cannot confirm the flame, locking out the unit.
- A clogged air filter or blocked vent tripping a safety before ignition.
- A blocked condensate drain or stuck pressure switch on high-efficiency units.
- A gas-supply issue, or a closed gas valve.
- A control board fault interrupting the start sequence.
Safe checks you can do first
Before booking a visit, rule out the simple things: confirm the thermostat is on and set to heat (fresh batteries help), check that the breaker and the furnace power switch are on, and inspect the air filter — a clogged filter is behind a surprising share of breakdowns. On a high-efficiency unit, a quick look at the condensate drain can save a call. Reset the system once if it has locked out.
When to call a licensed technician
Call a pro for anything involving gas, refrigerant, or internal electrical parts. If you ever smell gas, leave the home and call your gas utility or 911 from outside first. Repeated ignition lockouts mean it is time for a diagnosis, not more resets.
What a repair visit actually involves
When a technician arrives, the first job is a real diagnosis — measuring, testing components, and reading any fault history rather than swapping parts and hoping. Once the actual cause is clear, you get an itemised quote before anything is replaced. Most common faults are a same-visit fix; the honest exception is a unit so old or worn that a repair is throwing good money after bad — and we will say so plainly rather than keep selling you parts.
Stopping it from happening again
Most repeat faults trace back to one of two things: a root cause that got patched instead of fixed, or maintenance that quietly fell behind. Once your furnace is running again, an on-schedule filter and one professional tune-up a year are the cheapest insurance against the same call next season. Our maintenance plans make the annual part automatic, and this guide explains how often different systems really need attention.
What to expect when you book
The process is simple and transparent. We start with a few questions to understand what you are seeing and find a visit time that suits you. On site, a licensed technician diagnoses the real cause rather than guessing, then explains it in plain language. You get a clear, itemised quote before any work starts, and we only proceed once you say yes. No surprise line items, and no pressure to add things you do not need.
Talk to a licensed local HVAC team in Greater Vancouver.
Straight answers, fair pricing, and no pressure to buy what you don’t need.
Why homeowners call HeatLand
HeatLand is a local heating and cooling company based in Burnaby, serving Greater Vancouver and the wider Lower Mainland. We diagnose before we quote, we explain what we find in plain language, and we will tell you honestly when a repair makes more sense than a replacement — or the other way around. There is no commission-driven upsell here.
Frequently asked questions
What is an ignition lockout?
After a few failed attempts to light, the furnace locks out for safety so it will not keep dumping gas. That is the control protecting your home — a reset clears it once, but the cause remains.
Can I fix ignition failure myself?
You can rule out a clogged filter, a closed gas valve, and a power issue. The igniter, flame sensor, and pressure switch are technician territory.
How soon can you repair it?
Igniter and flame-sensor faults are common, and we carry parts. Call (604) 330-3812 — most are a same-visit fix.
Related services & guides
{“@context”: “https://schema.org”, “@type”: “Article”, “headline”: “Furnace ignition failure emergency”, “description”: “Furnace ignition failure in Greater Vancouver? Safe checks plus fast, honest diagnosis from HeatLand. Call (604) 330-3812.”, “image”: “https://heatland.ca/wp-content/uploads/2025/04/Heatland-Heating-cooling-Services-in-Metro-Vancouver.jpg”, “datePublished”: “2026-06-28”, “dateModified”: “2026-06-28”, “author”: {“@type”: “Organization”, “name”: “HeatLand Heating & Air Conditioning”}, “publisher”: {“@type”: “Organization”, “name”: “HeatLand Heating & Air Conditioning”, “telephone”: “+1-604-330-3812”}, “mainEntityOfPage”: {“@type”: “WebPage”, “@id”: “https://heatland.ca/furnace-ignition-failure-emergency-greater-vancouver/”}}
{“@context”: “https://schema.org”, “@type”: “FAQPage”, “mainEntity”: [{“@type”: “Question”, “name”: “What is an ignition lockout?”, “acceptedAnswer”: {“@type”: “Answer”, “text”: “After a few failed attempts to light, the furnace locks out for safety so it will not keep dumping gas. That is the control protecting your home — a reset clears it once, but the cause remains.”}}, {“@type”: “Question”, “name”: “Can I fix ignition failure myself?”, “acceptedAnswer”: {“@type”: “Answer”, “text”: “You can rule out a clogged filter, a closed gas valve, and a power issue. The igniter, flame sensor, and pressure switch are technician territory.”}}, {“@type”: “Question”, “name”: “How soon can you repair it?”, “acceptedAnswer”: {“@type”: “Answer”, “text”: “Igniter and flame-sensor faults are common, and we carry parts. Call (604) 330-3812 — most are a same-visit fix.”}}]}