A Majestic gas fireplace pilot that keeps going out, or won't stay lit at all, usually points to the pilot and flame-proving components. Here is why a pilot outage happens, the safe steps a Greater Vancouver homeowner can take, and when the problem calls for a licensed gas technician.
HeatLand keeps Greater Vancouver homes comfortable with professional gas fireplace service.
Call (604) 330-3812 Get a Free QuoteWhy the pilot goes out
On standing-pilot Majestic models, the pilot stays lit only as long as the thermocouple senses its heat and signals the gas valve to stay open. If the pilot drops out as soon as you release the knob, the thermocouple is the most common cause, either worn out or not getting enough heat from a weak pilot. If the pilot itself burns small, wandering, or yellow, a clogged pilot orifice or dust on the assembly is usually behind it.
Drafts can also blow out a pilot, and in older Greater Vancouver homes and basement suites, air movement around the firebox or a venting issue can contribute. The damp off-season leaves dust and spider webbing on the pilot, which is a frequent reason it won't hold come fall.
- Pilot drops out on knob release: usually a worn or starved thermocouple
- Small, yellow, or wandering pilot: clogged orifice or dust
- A draft or venting issue blowing the pilot out
- Debris from sitting idle over the off-season
Safe checks before calling a pro
Confirm the gas supply valve is open, then follow the lighting instructions printed on the fireplace or in your manual. Hold the control knob for the full recommended time, often around 30 to 60 seconds, so the thermocouple heats fully before you release it, since releasing too early is a very common reason the pilot won't stay lit. On IPI models, replace the backup batteries with fresh ones.
Do not clean the pilot orifice, adjust the thermocouple, or service the gas valve, as those are licensed tasks. If the pilot won't hold after the full hold time, a worn thermocouple or dirty pilot is likely and needs a technician. If you ever smell gas, leave the home and call your gas utility's emergency line first.
- Verify the gas shutoff valve is open
- Hold the control knob the full recommended time when relighting
- Replace IPI backup batteries with fresh ones
Frequently Asked Questions
Why does my Majestic pilot keep going out?
The most common cause is a worn thermocouple that no longer holds the gas valve open, or a weak pilot that doesn't heat the thermocouple enough. A clogged pilot or a draft can also be responsible. A technician can clean the pilot and replace the part if needed.
How long should I hold the pilot knob?
Follow the time on the unit, usually around 30 to 60 seconds. This lets the thermocouple heat up enough to keep the valve open. Releasing too soon is one of the most frequent reasons a pilot won't stay lit.
Could a draft be blowing out my pilot?
It can, especially in older homes or basement suites with air movement around the firebox, or where there's a venting concern. If the pilot is small or easily disturbed, have a technician check the pilot flame strength and venting.
When should I call a technician?
If the pilot won't hold after the full hold time with fresh batteries, the thermocouple or pilot assembly likely needs service. HeatLand can clean the pilot, replace the sensing part, and confirm safe operation across Greater Vancouver.
Want it sorted properly? HeatLand’s licensed technicians serve homeowners across Greater Vancouver.
Call (604) 330-3812 Get a Free QuoteHeatLand Heating & Cooling is a licensed and insured, TSBC-certified HVAC company serving homeowners across Greater Vancouver. Our technicians diagnose the real fault, explain your options in plain language, and complete the work safely and to code.
{“@context”:”https://schema.org”,”@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:”Why does my Majestic pilot keep going out?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”The most common cause is a worn thermocouple that no longer holds the gas valve open, or a weak pilot that doesn’t heat the thermocouple enough. A clogged pilot or a draft can also be responsible. A technician can clean the pilot and replace the part if needed.”}},{“@type”:”Question”,”name”:”How long should I hold the pilot knob?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Follow the time on the unit, usually around 30 to 60 seconds. This lets the thermocouple heat up enough to keep the valve open. Releasing too soon is one of the most frequent reasons a pilot won’t stay lit.”}},{“@type”:”Question”,”name”:”Could a draft be blowing out my pilot?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”It can, especially in older homes or basement suites with air movement around the firebox, or where there’s a venting concern. If the pilot is small or easily disturbed, have a technician check the pilot flame strength and venting.”}},{“@type”:”Question”,”name”:”When should I call a technician?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”If the pilot won’t hold after the full hold time with fresh batteries, the thermocouple or pilot assembly likely needs service. HeatLand can clean the pilot, replace the sensing part, and confirm safe operation across Greater Vancouver.”}}]}{“@context”:”https://schema.org”,”@type”:”Article”,”headline”:”Majestic gas fireplace pilot outage in Greater Vancouver”,”publisher”:{“@type”:”Organization”,”name”:”HeatLand Heating & Cooling”,”url”:”https://heatland.ca”},”url”:”https://heatland.ca/majestic-gas-fireplace-pilot-outage-greater-vancouver/”}