HRV Installation in Burnaby | Heat Recovery Ventilator | HeatLand

HRV installation in Burnaby from HeatLand — mechanical fresh air ventilation for Burnaby's newer construction and airtight renovations. HeatLand installs and services HRV and ERV systems throughout Burnaby.

What Is an HRV or ERV?

A Heat Recovery Ventilator (HRV) or Energy Recovery Ventilator (ERV) is a mechanical ventilation system that exchanges stale indoor air with fresh outdoor air while recovering most of the heat (and, for an ERV, moisture) from the exhaust air. Modern airtight homes in Burnaby require mechanical ventilation to maintain healthy indoor air quality — natural air leakage in a well-sealed home is not sufficient to remove pollutants, CO₂, and moisture at appropriate rates.

HRV vs ERV for Burnaby Homes

An HRV transfers heat but not moisture between the incoming and outgoing air streams — the right choice for most of British Columbia’s climate zones, where winter humidity inside a well-sealed home tends to be adequate without adding outdoor moisture. An ERV transfers both heat and moisture, making it a better choice for very dry climates or buildings with very low internal moisture generation. For most Burnaby homes, HeatLand recommends an HRV.

HRV/ERV Installation in Burnaby

HRV installation in a Burnaby home typically involves mounting the unit in a utility room or mechanical room, connecting intake and exhaust ducts through the exterior, and distributing fresh air through a dedicated distribution system or integrating with the existing forced-air duct system. Filter maintenance is required two to four times per year — the filters must be removed and cleaned to maintain airflow and heat recovery efficiency.

Related: Furnace installation | Annual HVAC maintenance

FAQs — HRV Installation in Burnaby

{“@context”:”https://schema.org”,”@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:”Is an HRV required in new construction in Burnaby?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Yes u2014 BC Building Code requires mechanical ventilation in new homes meeting modern airtightness standards. An HRV is the standard solution for compliance with Part 9 residential ventilation requirements. HeatLand can advise on the specific requirement for your Burnaby project.”}},{“@type”:”Question”,”name”:”How much maintenance does an HRV require?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”HRV filters should be cleaned two to four times per year. The heat exchange core can be removed and cleaned annually. The exterior intake and exhaust hoods should be checked for debris blockage seasonally. HeatLand can include HRV maintenance in an annual HVAC service visit.”}}]}{“@context”:”https://schema.org”,”@type”:”Article”,”headline”:”HRV Installation in Burnaby | Heat Recovery Ventilator | HeatLand”,”publisher”:{“@type”:”Organization”,”name”:”HeatLand Heating & Cooling”,”url”:”https://heatland.ca”},”url”:”https://heatland.ca/hrv-installation-burnaby/”}