fbpx

York furnace error code list

Furnace0 comments

York furnace error code list

Introduction to York Furnace Error Codes

York furnace error codes are generated by your furnace when it experiences a technical issue. These codes can range from minor to major ones requiring professional attention. The codes can be displayed in various ways, such as on a digital display, blinking LED lights, or even a combination. Understanding these codes and what they mean is important to troubleshoot the issue and taking steps to get your furnace working again.

Types of York Furnace Error Codes

York furnace error codes can be divided into two main categories: primary and secondary codes. Primary codes are the first ones the furnace generates when it experiences a technical issue. These codes are usually specific to the issue that is causing the problem and will help you identify the issue quickly. Secondary codes are generated after the primary code and can provide additional information about the issue.

Common York Furnace Error Codes

You may come across a few common York furnace error codes. These include the following:

  • E1: This code indicates an issue with the furnace’s pressure switch.
  • E2: This code indicates an issue with the furnace’s circuit board.
  • E3: This code indicates an issue with the furnace’s fan motor.
  • E4: This code indicates an issue with the furnace’s gas valve.
  • E5: This code indicates an issue with the furnace’s flame sensor.

Troubleshooting York Furnace Error Codes

Once you understand the codes that are being generated by your furnace, you can begin the process of troubleshooting them. The first step is to identify the issue causing the error code. This can be done by referring to the manual with your furnace or searching online for solutions to the specific code. Once you have identified the issue, you can then take steps to rectify it. This may involve replacing certain components, such as the pressure switch or the flame sensor, or adjusting certain settings.

How to Reset York Furnace Error Codes

Once you have identified the issue and taken steps to rectify it, the next step is to reset the error codes. This can be done by powering off the furnace and then powering it back on. When the furnace is powered back on, the error codes should be reset, and the furnace should function properly again.

How to Prevent York Furnace Error Codes

The best way to prevent York furnace error codes is to ensure that your furnace is properly maintained. This means having it inspected and serviced regularly by a qualified professional. Regular maintenance will help ensure that your furnace’s components are in good working order and that any potential issues are identified and addressed before they become serious problems.

York Furnace Error Code List

Here is a comprehensive list of York furnace error codes that you may come across:

  • E1: Pressure switch issue
  • E2: Circuit board issue
  • E3: Fan motor issue
  • E4: Gas valve issue
  • E5: Flame sensor issue
  • E6: Ignition issue
  • E7: Blower motor issue
  • E8: Limit switch issue
  • E9: Thermostat issue
  • E10: Flame rollout switch issue
  • E11: Ignition lockout issue
  • E12: Rollout limit switch issue
  • E13: High-limit switch issue
  • E14: Gas valve stuck open issue

Conclusion

York furnace error codes can be a bit confusing, but understanding them is important to troubleshoot and rectify any issues your furnace may have. By referring to this comprehensive list of York furnace error codes, you will be able to identify the issue quickly and take steps to get your furnace running again in no time. Additionally, regular maintenance of your furnace can help to prevent error codes from occurring in the first place.

 

“Inspections, Installations, Repairs & Maintenance”