fbpx

Boiler error code ea

Boiler0 comments

Boiler error code ea

A boiler error code EA or EC indicates that the burner is not working. This might be due to a blocked vent, an improper fuel mix, a clogged burner or a dirty air filter.

Boiler error code EA is a problem that has to do with the heat exchanger coils.

When the temperature of the water in a boiler’s heat exchanger coils gets too hot, it can cause inter-tube pressure to increase. This will cause an overexposure of tubes in the unit, which can lead to a rupture or tube failure.

A boil water advisory could be issued when codes ea are detected by an automatic pressure relief valve or by electric monitoring systems with time-temperature cutoff devices for electric boilers and hot water tanks.

This section seeks to provide information about the boiler error code Ea.

Boiler error code (Ea) is a warning signal that is given when there is an overpressure in the boiler. When this code appears, it indicates that the boiler has been operating at a pressure beyond design limits and has exceeded the specified criteria of its operating procedures. This can be due to several reasons:

The combustion process is not handled properly, which leads to excess air in the furnace. The combustion chamber becomes leaner than required in order to correct this situation and it may lead to an overpressure condition.

“Inspections, Installations, Repairs & Maintenance”