fbpx

Daikin furnace error codes

Furnace0 comments

Daikin furnace error codes

The common errors are:

– ERROR-DEFECT-E: This means a defect/damage to the AC unit.

– ERROR-FAN-1: This means a problem with the fan motor.

– ERROR-FAN2: This means that there is a problem with either the motor or fan blade.

Daikin furnace error codes are an essential part of a homeowner’s life. These error codes notify the homeowner about the problems with their heating system so they can try to fix them before they get worse.

Here is a list of a few Daikin furnace error codes:

1) Alarm not actuated (A1)

2) No power supply to the control board (EC2)

3) Controller A is on, and controller B is off (EC3)

4) No controller board detected (EB0)

5) Communication failure between controllers A and B (E36).

Daikin furnace error codes are most commonly found on the heat exchangers, located in different parts of the house.

The Daikin furnace error code indicates a problem with the heat exchanger. The error code may also indicate a problem with the thermostat or other parts of the furnace system.

“Inspections, Installations, Repairs & Maintenance”