fbpx

Boiler error code e1

Boiler0 comments

Boiler error code e1

Boiler error code e1 is a boiler fault code that means the boiler is not working at all. The problem could be something as simple as a tripped circuit breaker or there may be something more complex going on.

The boiler error code e1 is an indication that the boiler has detected a problem with the heating demand. This can happen when there is no or too little water in the boiler. If this turns out to be the case, you can try increasing the “water level” by turning on a flow of water at the taps in your house until it reaches at least 1.5 metres. If this does not fix the issue, you should call your gas supplier for help right away.

Boiler error code e1 is a very common boiler error code that you can find in your boiler’s control board. It usually means that the boiler water level is too low.

This introduction will help someone who has no idea on what this error code means to understand the problem they should look into when it comes up in the system.

“Inspections, Installations, Repairs & Maintenance”