fbpx

Bryant furnace error code 126

Furnace0 comments

Bryant furnace error code 126

Bryant furnaces are a classic and reliable heating system. Bryant offers a long-standing warranty on all of their heating products.

Error code 126 is caused by an issue with the flue damper or the opening that connects the burn chamber to the chimney or exhaust pipe. This can be caused by excess soot in the chimney to debris in the opening.

In conclusion, Bryant furnace error code 126 is caused by a blockage that prevents proper airflow from reaching your system and will produce short cycling and lower efficiency.

Bryant furnace error code 126 is the most common error code you might have to deal with. It will occur when an activated oxygen sensor detects a higher level of carbon monoxide in the air.

Bryant furnace error code 126 is uncommon and has several causes.

The most common causes for Bryant furnace error code 126 are:

– A dust build-up in the filter or near the evaporator coil can lead to a short circuit and cause a power outage.

– A dirty blower wheel can cause a short circuit and trip the breaker.

– The defrost sensor might be dirty or broken and, as a result, produce incorrect readings that might trigger an error code.

“Inspections, Installations, Repairs & Maintenance”