Anti-vibration feet are the small rubber or spring mounts that sit under an outdoor unit's corners, and when they are missing, worn, or installed wrong, you can end up with an annoying hum or buzz. For Greater Vancouver homeowners on compact lots, these feet are a big part of keeping equipment quiet, including units paired with NTI systems.
From diagnosis to installation, HeatLand handles home comfort system work across the Lower Mainland.
Call (604) 330-3812 Get a Free QuoteWhat the Feet Do and Why They Matter
Anti-vibration feet isolate the unit's frame from whatever it sits on, so vibration does not travel into a slab, bracket, or deck and turn into audible noise. When they compress unevenly, harden with age, or are skipped during installation, vibration couples directly into the structure and the result is a low buzz or rumble.
With NTI and similar equipment, correct isolation at the feet is part of a clean, quiet setup, and it also helps keep the unit stable and level.
- Isolate the frame from the mounting surface
- Prevent low-frequency vibration from becoming structure-borne noise
- Keep the unit level and reduce stress on connections
- Wear out over years of weather and load
Signs the Feet Are the Problem
A buzz that started recently, a unit that rocks slightly, or visibly flattened mounts are all hints. A few safe observations help you describe the issue accurately before service.
- Check whether each corner actually has a foot in place
- Look for cracked, hardened, or squashed rubber
- See if the unit sits level or rocks on its base
- Note whether the buzz tracks with the equipment running
Restoring a Quiet Mount
Replacing or correcting anti-vibration feet usually means lifting the unit carefully and protecting its connections, so it is work for a technician rather than a quick DIY. HeatLand can inspect the mounts on your equipment, including NTI installations, and restore proper isolation.
Frequently Asked Questions
What are anti-vibration feet for?
They isolate the outdoor unit's frame from the surface it rests on so vibration does not travel into the structure and become an audible hum or buzz.
How long do they last?
It varies with exposure and load, but rubber mounts harden and compress over years. If yours look flattened or cracked, they likely are no longer isolating effectively.
Are anti-vibration feet specific to NTI units?
Isolation feet are used across many brands. For an NTI system, a technician can confirm the correct mounts and installation so the unit runs quietly and stays level.
Can I replace the feet myself?
Because the unit must be lifted without stressing its connections, it is best left to a licensed technician who can do it safely and confirm the unit ends up level.
Get it diagnosed and fixed right. HeatLand serves homes across Metro Vancouver.
Call (604) 330-3812 Book an AssessmentHeatLand Heating & Cooling is a licensed and insured, TSBC-certified HVAC company serving homeowners across Greater Vancouver. Our technicians diagnose the real fault, explain your options in plain language, and complete the work safely and to code.
{“@context”:”https://schema.org”,”@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:”What are anti-vibration feet for?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”They isolate the outdoor unit’s frame from the surface it rests on so vibration does not travel into the structure and become an audible hum or buzz.”}},{“@type”:”Question”,”name”:”How long do they last?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”It varies with exposure and load, but rubber mounts harden and compress over years. If yours look flattened or cracked, they likely are no longer isolating effectively.”}},{“@type”:”Question”,”name”:”Are anti-vibration feet specific to NTI units?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Isolation feet are used across many brands. For an NTI system, a technician can confirm the correct mounts and installation so the unit runs quietly and stays level.”}},{“@type”:”Question”,”name”:”Can I replace the feet myself?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Because the unit must be lifted without stressing its connections, it is best left to a licensed technician who can do it safely and confirm the unit ends up level.”}}]}{“@context”:”https://schema.org”,”@type”:”Article”,”headline”:”HVAC outdoor unit anti vibration feet in Greater Vancouver”,”publisher”:{“@type”:”Organization”,”name”:”HeatLand Heating & Cooling”,”url”:”https://heatland.ca”},”url”:”https://heatland.ca/hvac-outdoor-unit-anti-vibration-feet-greater-vancouver/”}